Dry lubricants, known as solid lubricants, have a layer-like structure in which the atomic bonds are parallel, the distance between the layers is small, and the aggregation state is not changed during use, such as graphite, molybdenum disulfide, boron nitride, tungsten disulfide, etc.
Dry lubricants have excellent pressure resistance, heat resistance and lubricating properties, can form a layer of highly adhesive lubricating film on the metal surface, and play the role of lubrication and anti-friction.
The four most commonly used solid lubricants are:
Graphite can be used as a dry powder for splash lubrication. It can be used as an additive to make water and oil. It can also be combined with other materials to form a composite material for lubrication in transmission. It can also be used in conductive conditions—wear-resistant parts.
Molybdenum disulfide MoS2, is known as "the king of high-grade solid lubricants." MoS2 can be added to various greases to form a non-sticky colloid state, which can increase lubricity and extreme pressure. MoS2 is also suitable for high-temperature, high-pressure, high-speed, and high-load mechanical working conditions to extend equipment life.
Tungsten disulfide WS2 has better performance than molybdenum disulfide, has a low coefficient of friction, and has high compressive strength. WS2 can be used in high temperature, high pressure, high speed, high load, and equipment operating in chemically active media.
Boron nitride BN, known as white graphene, can be applied to space vehicles.
Payment Term:
T/T, Western Union, Paypal, Credit Card, etc.
Shipment Term:
By courier, by air, by sea, as customers request.
-
The specific parameters of 3000 mesh ultrafine graphite powder for lock lubrication will depend on the type of lock and the intended application. However, some common parameters that may be relevant include:
-
The parameter "High quality graphene-based full synthetic lubricant 5LT tank GXT-Bike Dry for City bikes" refers to a type of bicycle lubricant that is made from high-quality graphene and synthetic compounds. It is designed to provide maximum protection against dirt, grime, and other contaminants on urban roads and is suitable for use on bicycles in general. The "5LT" indicates that the lubricant has a lower viscosity than traditional oil and can be easily added to the bike's engine oil. The "GXT-Bike Dry" feature means that the lubricant does not require refrigeration and can be used directly on the bike's surface without any additional preparation or treatment.
-
The parameter for high quantity wire drawing lubricant powder is not typically specified. However, it can be affected by various factors such as the type of wire being drawn, the size and weight of the parts being drawn, the pressure applied to the wire, the temperature of the work environment, and the presence of other substances in the air or on the surface of the wire.
-
The parameter you're referring to is likely the specifications for a dry/dry lubricant or a wet/wet lubricant for two bicycles. The GXT-BIKE (short for戈特贝克自行车) refers to the brand name of the bicycle lubricant, while "full synthetic" indicates that it contains synthetic compounds.
-
The parameter for 25 kg plastic bag lubricant powder for wire drawing machine can vary depending on the specific requirements of your application. Here are some general parameters that may be relevant:
-
The parameter "Graphite Powder" in the multi-specification hydrocarbon-based material is used to describe the type and quality of graphite powder that is being used for lubrication and thermal conductivity. This parameter refers to the specific properties of the particle size distribution, surface area, and crystal structure of the graphite powder.
-
The product you mentioned is called "ultrafine graphite" or "graphite powder". It's used in mechanical lubricants to provide better lubrication and reduce friction between moving parts. The chemical formula for ultrafine graphite can vary depending on the manufacturer, but it typically contains a high percentage of carbon with small particles of other elements such as aluminum, iron, or silicon.
-
The product you have mentioned is a dry film lubricant oil that has been designed to provide long-lasting lubrication for office equipment. The product's parameter suggests that it is a type of L-8030 lubricant, which stands for "low viscosity oil," and it has a viscosity index (Vis) value of 8030.
-
The VNOVO Noise ReductionPFPE Dry Lubricantgrease Oil Long Life Dry lubricant is designed for use in camera lenses. It has been formulated to provide long-lasting protection against wear and tear, as well as high performance. The lubricant contains natural oil extracts that reduce friction between the lens and its housing, reducing noise and improving image quality. It also provides excellent resistance to moisture, helping to prevent fogging and other forms of corrosion. This makes it an ideal choice for any photographer or video editor looking to protect their camera lens from everyday wear and tear.
