molybdenum disulfide spray provides a solid film lubricant that is ready to use in minutes. It forms a thin dry film of molybdenum disulfide with a low coefficient of friction and effective corrosion resistance.

It is a multi-purpose solid-lubricant that leaves a thin dry film of MoS2 on the desired surface. It is suitable for external components such as pre-preping bolts, chains, sprockets and cables and applications where no oil or liquid residue is desired.

This lubricant can be applied to a wide variety of surfaces, but is most commonly used to lubricate plain bearings, pins, cams and slides where a wet lubricant cannot be tolerated. This product has a temperature range of -50C to +450C and is non-carbonizing and resistant to water wash-off, making it ideal for lubricating in extreme temperatures and high pressures.

ROCOL - DRY FILM LUBRICANT is an aerosol high temperature solid film lubricant that contains micron-sized molybdenum disulfide. The molybdenum disulfide is bonded to a resin binding agent which forms a tough lubricant coating upon curing.

DRY FILM LUBRICANT dries rapidly to a hard black coating and adheres to most substrates, especially metal, with minimum surface preparation. It resists wear and abrasion, has high lubricity, is stable at extreme temperatures and pressures and provides anti-corrosion protection.

Molybdenum disulfide is the most widely used lubricant material for industrial purposes, it is a soft, crystalline form of sulfur which occurs naturally in granite. It is mined and refined to achieve purity suitable for lubricant use.